By Wilde Becker. Speaker Stands. At Tuesday, July 30th 2019, 19:09:37 PM.
That’s where you need to put the sub. If your sub has a phase adjustment knob, or a polarity–invert switch, adjust this until you hear the loudest result from frequencies around the crossover point, typically 80 to 120 Hz.
If you already have a speaker stand with spikes and your floor is made of wood, then you should consider putting some form of isolation platform between the speaker and the stand, to prevent the cabinet vibrations reaching the stand and, through it, the floor. Avoid flimsy stands that move or rock when you touch them. If the final assembly doesn’t feel completely solid, avoid it.
Where vibrations are allowed to leak into any studio furniture or wooden floors, the audible result is often a blurring of the bass and lower mid range, as well as a deterioration in the stereo image. By using an appropriate stand or platform, the bass end should tighten up to a very noticeable degree, leaving the mids sounding clearer and the imaging better defined.
An isolation platform works in a similar way to a car’s suspension, and comprises three mechanical components: a spring, a mass supported by the spring, and some form of damping to prevent the sprung mass from continuing to bounce around. In a car you have the springs between the axles and the car body: the car body provides the mass and the shock absorbers provide the damping, to stop you having a bouncy ride.
The range begins with the award winning Nexus Series, a three column design made for the HiFi enthusiast. As with all Atacama speaker stands, Nexus allows you to increase the mass of the stand by filling the largest column with Atabites.
We might call them bookshelf speakers, but does that mean it’s a good idea to put them on one? Nothing is stopping you from doing it, but it’s your sound performance that’s at stake – and there’s much to lose – and, if you’ve just shelled out a significant amount for your new speakers, it’s a bad start to what should be a great investment.