By Wilde Becker. Speaker Stands. At Tuesday, July 30th 2019, 19:09:04 PM.
The theory is that the mass and spring characteristics are chosen so that the resonant frequency of the combination is well below that of any frequency they’re likely to be asked to isolate. For example, if the lowest note a speaker can reproduce is 30Hz, then the resonant frequency of the supporting platform needs to be well below that — perhaps just a few Hertz or less.
And stands do more than combatting early reflections. They also provide what’s called decoupling between your speakers and the floor (which is also known as mechanical isolation). We will let Otto describe their construction: “Take your typical Dynaudio Stand; you have feet with either spikes for solid floors or rubber for wooden ones at the bottom. Then you have a base plate that manages vibrations. Also, large base plates with feet far apart are more stable, making it harder for the speakers to fall over.
Of course, you do still need to attend to room reflections by adding some basic acoustic treatment — but that’s another subject and one that we have covered on numerous occasions in our Studio SOS series.
We might call them bookshelf speakers, but does that mean it’s a good idea to put them on one? Nothing is stopping you from doing it, but it’s your sound performance that’s at stake – and there’s much to lose – and, if you’ve just shelled out a significant amount for your new speakers, it’s a bad start to what should be a great investment.
A speaker platform is designed primarily to provide a degree of mechanical isolation between the speaker and the surface upon which it is placed, while keeping the speaker firmly in place. This is particularly important when siting speakers on lightweight desks or shelves, as these can easily be set into vibration if in direct contact with a speaker cabinet.
No, it’s not because we don’t like your bookshelf. It’s probably really good looking. But, bookshelves, sideboards, TV-boards and tables all share a common drawback: surfaces. You don’t want surfaces close to your speakers, as surfaces can cause early reflections that colour and distort the sound image – that’s also why we recommend getting your speakers away from corners and walls.