By Wilde Becker. Speaker Stands. At Tuesday, July 30th 2019, 19:07:45 PM.
Even if you already have a loudspeaker stand, you can still use one of these foam–based speaker platforms on top of it to reduce the amount of vibration getting into the stand and subsequently into the floor. Many of the commercially available platforms come with additional foam wedges that may be used to adjust the vertical angle of the speaker if necessary.
You can make a speaker move less in many different ways, and one of those is by adding more mass to the speaker and the stand; making it harder for the speaker to move. That’s why you’ll find a sand compartment in most stands.
If you already have a speaker stand with spikes and your floor is made of wood, then you should consider putting some form of isolation platform between the speaker and the stand, to prevent the cabinet vibrations reaching the stand and, through it, the floor. Avoid flimsy stands that move or rock when you touch them. If the final assembly doesn’t feel completely solid, avoid it.
Centre Channel speakers require dedicated stands as they tend to be of unconventional dimensions. The CC Series provides that solution and are available in a wide range of height options.
Many stands come with a compartment dedicated to sand and similarly heavy and well-damped materials. And there’s method in the madness. You see, the speaker plays music by moving its drive unit in and out to create sound pressure: when the drive unit pushes outwards, it creates sound pressure, but when it moves inwards it pushes the entire speaker backwards.
If you already have a pair of simple foam speaker platforms, you can improve their performance simply by gluing a heavy floor tile to the top. Ordinary contact adhesive works fine for this. Then you can either glue some kitchen mat to the upper surface, to provide some grip, or use Blu–Tack, as discussed earlier, between the tile and the loudspeaker.