By Wilde Becker. Speaker Stands. At Tuesday, July 30th 2019, 19:09:31 PM.
If you already have a pair of simple foam speaker platforms, you can improve their performance simply by gluing a heavy floor tile to the top. Ordinary contact adhesive works fine for this. Then you can either glue some kitchen mat to the upper surface, to provide some grip, or use Blu–Tack, as discussed earlier, between the tile and the loudspeaker.
No, it’s not because we don’t like your bookshelf. It’s probably really good looking. But, bookshelves, sideboards, TV-boards and tables all share a common drawback: surfaces. You don’t want surfaces close to your speakers, as surfaces can cause early reflections that colour and distort the sound image – that’s also why we recommend getting your speakers away from corners and walls.
The HMS Series is considered to be Audiophile level by many and incorporates a significant increase in mass loading capacity and designed with very high quality speakers in mind such ProAc and other premium manufactures.
Fortunately, we don’t need to balance the speaker on actual springs, as a suitably dense piece of acoustic foam can act as both spring and damper. The speaker cabinet provides mass — so sitting a speaker cabinet directly onto a piece of foam, such as an Auralex MoPad, will bring about an improvement in the amount of vibrational energy getting through to the desk. However, foam isn’t particularly rigid, so the cabinet may still tend to move back and forth slightly as the speaker cones move, especially if the speaker cabinet isn’t particularly heavy.
And stands do more than combatting early reflections. They also provide what’s called decoupling between your speakers and the floor (which is also known as mechanical isolation). We will let Otto describe their construction: “Take your typical Dynaudio Stand; you have feet with either spikes for solid floors or rubber for wooden ones at the bottom. Then you have a base plate that manages vibrations. Also, large base plates with feet far apart are more stable, making it harder for the speakers to fall over.
We tend to think of a loudspeaker as a fixed box that produces sound directly from the moving cones of the speakers (and, where the speaker is ported, from the port as well). Although that is certainly where most of the sound comes from, the reality is that no matter how rigid the cabinet is there will also be some vibration of the cabinet walls.