By Wilde Becker. Speaker Stands. At Tuesday, July 30th 2019, 19:05:49 PM.
Where vibrations are allowed to leak into any studio furniture or wooden floors, the audible result is often a blurring of the bass and lower mid range, as well as a deterioration in the stereo image. By using an appropriate stand or platform, the bass end should tighten up to a very noticeable degree, leaving the mids sounding clearer and the imaging better defined.
If you already have a pair of simple foam speaker platforms, you can improve their performance simply by gluing a heavy floor tile to the top. Ordinary contact adhesive works fine for this. Then you can either glue some kitchen mat to the upper surface, to provide some grip, or use Blu–Tack, as discussed earlier, between the tile and the loudspeaker.
So, what should you do instead? We’ve talked to our product team to learn more – and the solution is stands. Sideboards, tables and chairs are out of the question, too. Speaker stands are specifically designed to bring the best out of your speakers by managing vibrations, reducing early reflections and ensuring the proper amount of treble. Together with our Product Manager - Home, Otto Jørgensen, we’ve taken a look at the fundamentals.
One of the roles of an effective speaker support is to prevent such vibrations from being transferred into other structures, such as wooden floors, desktops, shelves or mixer meterbridges. It should also hold the speaker as firmly as possible, to reduce movement due to the action/reaction effect.
Subwoofers can be placed directly onto solid floors, but an isolation platform of some type will help clean up the sound if that floor is made of wood or chipboard. It isn’t a good idea to position subs very far from the floor — up to about 150mm shouldn’t present a problem, but more than that and the reflections can start to cause issues.
And, of course, it needs to put the speaker in the correct position relative to the listener, which usually means with the tweeter aimed at an imaginary point just behind the listener’s head. Note, though, that a few speakers are deliberately designed to be aimed directly ahead rather than at the listener, so always check the recommendations in the manual that comes with your particular loudspeaker before directing them inwards.