By Wilde Becker. Speaker Stands. At Tuesday, July 30th 2019, 19:08:26 PM.
Atacama offer a wide range of speaker stands with a choice of colours, dimensions and style to satisfy most requirements .
It’s physics: for every action, there’s an equal and opposite reaction.
A speaker platform is designed primarily to provide a degree of mechanical isolation between the speaker and the surface upon which it is placed, while keeping the speaker firmly in place. This is particularly important when siting speakers on lightweight desks or shelves, as these can easily be set into vibration if in direct contact with a speaker cabinet.
The theory is that the mass and spring characteristics are chosen so that the resonant frequency of the combination is well below that of any frequency they’re likely to be asked to isolate. For example, if the lowest note a speaker can reproduce is 30Hz, then the resonant frequency of the supporting platform needs to be well below that — perhaps just a few Hertz or less.
We might call them bookshelf speakers, but does that mean it’s a good idea to put them on one? Nothing is stopping you from doing it, but it’s your sound performance that’s at stake – and there’s much to lose – and, if you’ve just shelled out a significant amount for your new speakers, it’s a bad start to what should be a great investment.
Fortunately, we don’t need to balance the speaker on actual springs, as a suitably dense piece of acoustic foam can act as both spring and damper. The speaker cabinet provides mass — so sitting a speaker cabinet directly onto a piece of foam, such as an Auralex MoPad, will bring about an improvement in the amount of vibrational energy getting through to the desk. However, foam isn’t particularly rigid, so the cabinet may still tend to move back and forth slightly as the speaker cones move, especially if the speaker cabinet isn’t particularly heavy.