By Wilde Becker. Speaker Stands. At Tuesday, July 30th 2019, 19:08:14 PM.
The theory is that the mass and spring characteristics are chosen so that the resonant frequency of the combination is well below that of any frequency they’re likely to be asked to isolate. For example, if the lowest note a speaker can reproduce is 30Hz, then the resonant frequency of the supporting platform needs to be well below that — perhaps just a few Hertz or less.
All that unwanted movement can colour and distort the sound. We do our best to prevent vibrations by adding bracing to the cabinet, but that doesn’t really help with the movement.
And according to Otto Jørgensen, this is where you have the most to gain from acquiring a pair of speaker stands: “The most impactful benefit of getting stands is added distance between your speakers and surfaces. It keeps early reflections to a minimum. And that’s especially important for the speakers’ low-end performance.”
We tend to think of a loudspeaker as a fixed box that produces sound directly from the moving cones of the speakers (and, where the speaker is ported, from the port as well). Although that is certainly where most of the sound comes from, the reality is that no matter how rigid the cabinet is there will also be some vibration of the cabinet walls.
should also avoid putting them into enclosed spaces, such as under desks with side panels, as this creates a resonant system that can further mess with bass clarity and evenness. Also be aware that you need to maintain a minimum distance between the cabinet and walls when positioning both rear–ported subwoofers and speakers. Details of how far this needs to be should be included in your speaker or sub’s manual.
You may have noticed that some speaker stands are fitted with spikes on the base, which help to make a rigid and stable contact with the floor. As long as the stands are both robust and stable, this strategy works well on solid floors, but you may find that it causes problems on wooden floors, due to vibrations from the speaker cabinet being transferred to the floor via the rigid stand and spikes. The floor will then act as the king of soundboards!