By Wilde Becker. Speaker Stands. At Tuesday, July 30th 2019, 19:07:04 PM.
A speaker platform is designed primarily to provide a degree of mechanical isolation between the speaker and the surface upon which it is placed, while keeping the speaker firmly in place. This is particularly important when siting speakers on lightweight desks or shelves, as these can easily be set into vibration if in direct contact with a speaker cabinet.
Where vibrations are allowed to leak into any studio furniture or wooden floors, the audible result is often a blurring of the bass and lower mid range, as well as a deterioration in the stereo image. By using an appropriate stand or platform, the bass end should tighten up to a very noticeable degree, leaving the mids sounding clearer and the imaging better defined.
If you already have a pair of simple foam speaker platforms, you can improve their performance simply by gluing a heavy floor tile to the top. Ordinary contact adhesive works fine for this. Then you can either glue some kitchen mat to the upper surface, to provide some grip, or use Blu–Tack, as discussed earlier, between the tile and the loudspeaker.
The range begins with the award winning Nexus Series, a three column design made for the HiFi enthusiast. As with all Atacama speaker stands, Nexus allows you to increase the mass of the stand by filling the largest column with Atabites.
Of course, you do still need to attend to room reflections by adding some basic acoustic treatment — but that’s another subject and one that we have covered on numerous occasions in our Studio SOS series.
Centre Channel speakers require dedicated stands as they tend to be of unconventional dimensions. The CC Series provides that solution and are available in a wide range of height options.