By Wilde Becker. Speaker Stands. At Tuesday, July 30th 2019, 19:06:57 PM.
We might call them bookshelf speakers, but does that mean it’s a good idea to put them on one? Nothing is stopping you from doing it, but it’s your sound performance that’s at stake – and there’s much to lose – and, if you’ve just shelled out a significant amount for your new speakers, it’s a bad start to what should be a great investment.
Centre Channel speakers require dedicated stands as they tend to be of unconventional dimensions. The CC Series provides that solution and are available in a wide range of height options.
If you visit the various hi–fi forums you’ll find a number of conflicting views on what the best material to use is, but there’s often little to back up people’s claims, and I’d suggest that that way lies madness! Dry playground sand works just fine, and you can even leave it inside plastic bags if you wish to avoid things getting messy.
If you already have a speaker stand with spikes and your floor is made of wood, then you should consider putting some form of isolation platform between the speaker and the stand, to prevent the cabinet vibrations reaching the stand and, through it, the floor. Avoid flimsy stands that move or rock when you touch them. If the final assembly doesn’t feel completely solid, avoid it.
Fortunately, we don’t need to balance the speaker on actual springs, as a suitably dense piece of acoustic foam can act as both spring and damper. The speaker cabinet provides mass — so sitting a speaker cabinet directly onto a piece of foam, such as an Auralex MoPad, will bring about an improvement in the amount of vibrational energy getting through to the desk. However, foam isn’t particularly rigid, so the cabinet may still tend to move back and forth slightly as the speaker cones move, especially if the speaker cabinet isn’t particularly heavy.
One of the roles of an effective speaker support is to prevent such vibrations from being transferred into other structures, such as wooden floors, desktops, shelves or mixer meterbridges. It should also hold the speaker as firmly as possible, to reduce movement due to the action/reaction effect.