By Wilde Becker. Speaker Stands. At Tuesday, July 30th 2019, 19:06:53 PM.
We tend to think of a loudspeaker as a fixed box that produces sound directly from the moving cones of the speakers (and, where the speaker is ported, from the port as well). Although that is certainly where most of the sound comes from, the reality is that no matter how rigid the cabinet is there will also be some vibration of the cabinet walls.
If you visit the various hi–fi forums you’ll find a number of conflicting views on what the best material to use is, but there’s often little to back up people’s claims, and I’d suggest that that way lies madness! Dry playground sand works just fine, and you can even leave it inside plastic bags if you wish to avoid things getting messy.
A cheap DIY option is to build a couple of towers by stacking concrete blocks or bricks. This low–cost approach really works — we’ve used it successfully on more than one Studio SOS visit — and because of the high mass, very little vibrational energy makes it through to the floor. Some people like the rugged appearance of bricks, but if it’s not to your taste you can always disguise them with cloth drapes, or even spray them gold if you like that kind of thing!
And according to Otto Jørgensen, this is where you have the most to gain from acquiring a pair of speaker stands: “The most impactful benefit of getting stands is added distance between your speakers and surfaces. It keeps early reflections to a minimum. And that’s especially important for the speakers’ low-end performance.”
should also avoid putting them into enclosed spaces, such as under desks with side panels, as this creates a resonant system that can further mess with bass clarity and evenness. Also be aware that you need to maintain a minimum distance between the cabinet and walls when positioning both rear–ported subwoofers and speakers. Details of how far this needs to be should be included in your speaker or sub’s manual.
Fortunately, we don’t need to balance the speaker on actual springs, as a suitably dense piece of acoustic foam can act as both spring and damper. The speaker cabinet provides mass — so sitting a speaker cabinet directly onto a piece of foam, such as an Auralex MoPad, will bring about an improvement in the amount of vibrational energy getting through to the desk. However, foam isn’t particularly rigid, so the cabinet may still tend to move back and forth slightly as the speaker cones move, especially if the speaker cabinet isn’t particularly heavy.