By Wilde Becker. Speaker Stands. At Tuesday, July 30th 2019, 19:05:43 PM.
Of course, you do still need to attend to room reflections by adding some basic acoustic treatment — but that’s another subject and one that we have covered on numerous occasions in our Studio SOS series.
And, of course, it needs to put the speaker in the correct position relative to the listener, which usually means with the tweeter aimed at an imaginary point just behind the listener’s head. Note, though, that a few speakers are deliberately designed to be aimed directly ahead rather than at the listener, so always check the recommendations in the manual that comes with your particular loudspeaker before directing them inwards.
You could just plonk your speaker onto the top of your chosen stand, of course, but it’s best to have the speaker fixed to the stand in some way, because otherwise it can slide around. One popular and effective method is to place blobs of Blu–Tack under each corner; this acts as both a removable adhesive and as a damping medium. Another alternative is to use high–friction rubber matting, of the type sold for workshops and kitchens.
You may have noticed that some speaker stands are fitted with spikes on the base, which help to make a rigid and stable contact with the floor. As long as the stands are both robust and stable, this strategy works well on solid floors, but you may find that it causes problems on wooden floors, due to vibrations from the speaker cabinet being transferred to the floor via the rigid stand and spikes. The floor will then act as the king of soundboards!
And according to Otto Jørgensen, this is where you have the most to gain from acquiring a pair of speaker stands: “The most impactful benefit of getting stands is added distance between your speakers and surfaces. It keeps early reflections to a minimum. And that’s especially important for the speakers’ low-end performance.”
You can make a speaker move less in many different ways, and one of those is by adding more mass to the speaker and the stand; making it harder for the speaker to move. That’s why you’ll find a sand compartment in most stands.