By Wilde Becker. Speaker Stands. At Tuesday, July 30th 2019, 19:05:31 PM.
If you visit the various hi–fi forums you’ll find a number of conflicting views on what the best material to use is, but there’s often little to back up people’s claims, and I’d suggest that that way lies madness! Dry playground sand works just fine, and you can even leave it inside plastic bags if you wish to avoid things getting messy.
That’s where you need to put the sub. If your sub has a phase adjustment knob, or a polarity–invert switch, adjust this until you hear the loudest result from frequencies around the crossover point, typically 80 to 120 Hz.
One way to improve the situation is to add mass by means of a platform fixed to the top surface of the foam. Primacoustic do this in their Recoil Stabilizer by using a very thick steel slab with rubber matting on top, while Auralex and other companies use MDF topped with dense rubber on their more up–market platforms. IsoAcoustics take yet a different approach, by using a frame made from rigid components joined by resilient isolators.
To sum up, the platforms with a heavy plate of some type on top are the most effective, though you can add mass very easily to any type of support by using floor tiles. Similarly, the more massive and better damped a speaker stand, the less vibrational energy is likely to make it through to the floor and less the stand itself will vibrate. Compared with the cost of speakers, adding suitable stands or platforms is relatively inexpensive, yet it can make a very worthwhile improvement to the overall sound quality!
And, of course, it needs to put the speaker in the correct position relative to the listener, which usually means with the tweeter aimed at an imaginary point just behind the listener’s head. Note, though, that a few speakers are deliberately designed to be aimed directly ahead rather than at the listener, so always check the recommendations in the manual that comes with your particular loudspeaker before directing them inwards.
So, what should you do instead? We’ve talked to our product team to learn more – and the solution is stands. Sideboards, tables and chairs are out of the question, too. Speaker stands are specifically designed to bring the best out of your speakers by managing vibrations, reducing early reflections and ensuring the proper amount of treble. Together with our Product Manager - Home, Otto Jørgensen, we’ve taken a look at the fundamentals.