By Wilde Becker. TV Stands. At Tuesday, July 30th 2019, 19:04:17 PM.
For example, a VESA200 TV will have 200mm between each of the mounting holes and it is critical the mounting bracket on the TV mount stand is capable of supporting this VESA fitting both horizontally and vertically.
This model is useful as it comes with shelving for installing your AV equipment underneath the TV. You can buy models with different amounts of shelves to suit the equipment that you have.
This allows for more room when installing your AV equipment. A good example is the TransDeco model pictured above.
One potential drawback with these corner designs is that they can provide limited space for your AV equipment - especially if the rear goes to a point to fit exactly in the corner. Therefore, if you have a range of amplifiers, players and games consoles to install, then you might need to consider where they are all going to go.
The thickness of the glass, the type of cable management and the weight of the TV you are going to put on it are all part of the equation.
The rear of a corner stand is shaped so that it will push back much further into the corner of the room compared to a stand with a straight edge. This will save you space and make the TV less prominent in the room.