By Wilde Becker. Speaker Stands. At Tuesday, July 30th 2019, 19:04:27 PM.
Where vibrations are allowed to leak into any studio furniture or wooden floors, the audible result is often a blurring of the bass and lower mid range, as well as a deterioration in the stereo image. By using an appropriate stand or platform, the bass end should tighten up to a very noticeable degree, leaving the mids sounding clearer and the imaging better defined.
Speaker positioning is critical when it comes to creating the ideal soundscape. KEF Performance Speaker Stands were engineered in the UK specifically to ensure bookshelf speakers sound at their best. This encompasses ideal driver height positioning, steel damping plates accompanied by aluminium tube and base plates, and space available for the addition of inert filler for further stability. The Performance Speaker Stand is ideal for the LS50 and LS50 Wireless, but can also be utilised by other KEF Bookshelf Speakers.
If you already have a speaker stand with spikes and your floor is made of wood, then you should consider putting some form of isolation platform between the speaker and the stand, to prevent the cabinet vibrations reaching the stand and, through it, the floor. Avoid flimsy stands that move or rock when you touch them. If the final assembly doesn’t feel completely solid, avoid it.
The heavier the stand, the less it will move, and with many hi–fi and pro–audio speaker stands (including many of the models made by Atacama, for example), it’s possible to fill the hollow support column with a heavy material to add mass and to damp resonances. This could be sand, shot or any other heavy but well–damped material.
Subwoofers can be placed directly onto solid floors, but an isolation platform of some type will help clean up the sound if that floor is made of wood or chipboard. It isn’t a good idea to position subs very far from the floor — up to about 150mm shouldn’t present a problem, but more than that and the reflections can start to cause issues.
And, of course, it needs to put the speaker in the correct position relative to the listener, which usually means with the tweeter aimed at an imaginary point just behind the listener’s head. Note, though, that a few speakers are deliberately designed to be aimed directly ahead rather than at the listener, so always check the recommendations in the manual that comes with your particular loudspeaker before directing them inwards.