By Wilde Becker. Speaker Stands. At Tuesday, July 30th 2019, 19:04:09 PM.
Whether you use stands or platforms depends on what else you have in your system: usually you’ll pick whichever makes it easiest to get your speakers into the right physical position without them being occluded by other equipment, such as computer screens.
Centre Channel speakers require dedicated stands as they tend to be of unconventional dimensions. The CC Series provides that solution and are available in a wide range of height options.
The theory is that the mass and spring characteristics are chosen so that the resonant frequency of the combination is well below that of any frequency they’re likely to be asked to isolate. For example, if the lowest note a speaker can reproduce is 30Hz, then the resonant frequency of the supporting platform needs to be well below that — perhaps just a few Hertz or less.
The SLX Series is a professional quality stand which caters for larger bookshelf speakers where an increase in the footprint is required to ensure optimum stability.
You could just plonk your speaker onto the top of your chosen stand, of course, but it’s best to have the speaker fixed to the stand in some way, because otherwise it can slide around. One popular and effective method is to place blobs of Blu–Tack under each corner; this acts as both a removable adhesive and as a damping medium. Another alternative is to use high–friction rubber matting, of the type sold for workshops and kitchens.
To sum up, the platforms with a heavy plate of some type on top are the most effective, though you can add mass very easily to any type of support by using floor tiles. Similarly, the more massive and better damped a speaker stand, the less vibrational energy is likely to make it through to the floor and less the stand itself will vibrate. Compared with the cost of speakers, adding suitable stands or platforms is relatively inexpensive, yet it can make a very worthwhile improvement to the overall sound quality!