By Wilde Becker. Speaker Stands. At Tuesday, July 30th 2019, 19:03:22 PM.
Thus, the sand provides dampening, but it also prevents the stand from ringing when it’s excited by the right frequencies – another handy little add-on.
Fortunately, we don’t need to balance the speaker on actual springs, as a suitably dense piece of acoustic foam can act as both spring and damper. The speaker cabinet provides mass — so sitting a speaker cabinet directly onto a piece of foam, such as an Auralex MoPad, will bring about an improvement in the amount of vibrational energy getting through to the desk. However, foam isn’t particularly rigid, so the cabinet may still tend to move back and forth slightly as the speaker cones move, especially if the speaker cabinet isn’t particularly heavy.
Where vibrations are allowed to leak into any studio furniture or wooden floors, the audible result is often a blurring of the bass and lower mid range, as well as a deterioration in the stereo image. By using an appropriate stand or platform, the bass end should tighten up to a very noticeable degree, leaving the mids sounding clearer and the imaging better defined.
You could just plonk your speaker onto the top of your chosen stand, of course, but it’s best to have the speaker fixed to the stand in some way, because otherwise it can slide around. One popular and effective method is to place blobs of Blu–Tack under each corner; this acts as both a removable adhesive and as a damping medium. Another alternative is to use high–friction rubber matting, of the type sold for workshops and kitchens.
One of the roles of an effective speaker support is to prevent such vibrations from being transferred into other structures, such as wooden floors, desktops, shelves or mixer meterbridges. It should also hold the speaker as firmly as possible, to reduce movement due to the action/reaction effect.
Atacama offer a wide range of speaker stands with a choice of colours, dimensions and style to satisfy most requirements .