By Wilde Becker. Speaker Stands. At Tuesday, July 30th 2019, 19:03:05 PM.
If you already have a speaker stand with spikes and your floor is made of wood, then you should consider putting some form of isolation platform between the speaker and the stand, to prevent the cabinet vibrations reaching the stand and, through it, the floor. Avoid flimsy stands that move or rock when you touch them. If the final assembly doesn’t feel completely solid, avoid it.
All that unwanted movement can colour and distort the sound. We do our best to prevent vibrations by adding bracing to the cabinet, but that doesn’t really help with the movement.
No, it’s not because we don’t like your bookshelf. It’s probably really good looking. But, bookshelves, sideboards, TV-boards and tables all share a common drawback: surfaces. You don’t want surfaces close to your speakers, as surfaces can cause early reflections that colour and distort the sound image – that’s also why we recommend getting your speakers away from corners and walls.
should also avoid putting them into enclosed spaces, such as under desks with side panels, as this creates a resonant system that can further mess with bass clarity and evenness. Also be aware that you need to maintain a minimum distance between the cabinet and walls when positioning both rear–ported subwoofers and speakers. Details of how far this needs to be should be included in your speaker or sub’s manual.
A cheap DIY option is to build a couple of towers by stacking concrete blocks or bricks. This low–cost approach really works — we’ve used it successfully on more than one Studio SOS visit — and because of the high mass, very little vibrational energy makes it through to the floor. Some people like the rugged appearance of bricks, but if it’s not to your taste you can always disguise them with cloth drapes, or even spray them gold if you like that kind of thing!
The theory is that the mass and spring characteristics are chosen so that the resonant frequency of the combination is well below that of any frequency they’re likely to be asked to isolate. For example, if the lowest note a speaker can reproduce is 30Hz, then the resonant frequency of the supporting platform needs to be well below that — perhaps just a few Hertz or less.