By Wilde Becker. Speaker Stands. At Tuesday, July 30th 2019, 19:04:46 PM.
So, what should you do instead? We’ve talked to our product team to learn more – and the solution is stands. Sideboards, tables and chairs are out of the question, too. Speaker stands are specifically designed to bring the best out of your speakers by managing vibrations, reducing early reflections and ensuring the proper amount of treble. Together with our Product Manager - Home, Otto Jørgensen, we’ve taken a look at the fundamentals.
Where vibrations are allowed to leak into any studio furniture or wooden floors, the audible result is often a blurring of the bass and lower mid range, as well as a deterioration in the stereo image. By using an appropriate stand or platform, the bass end should tighten up to a very noticeable degree, leaving the mids sounding clearer and the imaging better defined.
Of course, you do still need to attend to room reflections by adding some basic acoustic treatment — but that’s another subject and one that we have covered on numerous occasions in our Studio SOS series.
A cheap DIY option is to build a couple of towers by stacking concrete blocks or bricks. This low–cost approach really works — we’ve used it successfully on more than one Studio SOS visit — and because of the high mass, very little vibrational energy makes it through to the floor. Some people like the rugged appearance of bricks, but if it’s not to your taste you can always disguise them with cloth drapes, or even spray them gold if you like that kind of thing!
You can make a speaker move less in many different ways, and one of those is by adding more mass to the speaker and the stand; making it harder for the speaker to move. That’s why you’ll find a sand compartment in most stands.
A speaker platform is designed primarily to provide a degree of mechanical isolation between the speaker and the surface upon which it is placed, while keeping the speaker firmly in place. This is particularly important when siting speakers on lightweight desks or shelves, as these can easily be set into vibration if in direct contact with a speaker cabinet.